Factory Inventory & Precision Manufacturing
Featured Titanium Fasteners & Set Screws
Manufactured from ultra-pure Baoji Grade 5 (Ti-6Al-4V) aerospace bar stock with rolled thread integrity, sub-micron hex/Torx sockets, and customizable surface passivation.
Structural Flange
Anodized Plain Finish Gr5 Hexagon Flange Titanium Open Nut M8/M10
View Product Specs
44%
Lighter than Alloy Steel
≥ 895 MPa
Tensile Strength (Gr5)
±0.005 mm
CNC Swiss Turning Tolerance
3-5 Days
Express Air to Warsaw (WAW)
Targeted Industrial Use Cases
Titanium Grub Screws in Warsaw's High-Tech Sectors
Warsaw and the wider Mazowieckie Voivodeship have evolved into Central Europe’s prime research, mechatronics, and rapid-prototyping hub. Our blind set screws solve specific engineering bottlenecks across Poland’s leading industrial verticals.
Robotics & Industrial Automation (Ursynów & Piaseczno)
High-speed pick-and-place gantry systems and robotic articulators in Warsaw’s robotics laboratories require minimum rotational inertia. Our DIN 916 cup-point titanium grub screws securely lock pulley gears and timing wheels on ground shafts without vibrating loose under cyclic accelerations.
- Low rotational mass reduces motor servo thermal load
- Extreme resistance to dynamic shear and rotational stripping
- Cold-headed rolled threads prevent socket round-out
Medical Technology & Orthopedic Instruments (Ochota Med-Hub)
Warsaw's biomaterials and surgical equipment facilities mandate fasteners that exhibit total bio-inertness and zero magnetic interference (MRI compatible). Titanium grub screws made from certified medical-grade titanium (Ti-6Al-4V ELI / ASTM F136) are deployed inside micro-actuators and articulated surgical handles.
- Zero cytotoxicity and passivation against autoclave steam
- Paramagnetic properties compliant with high-field diagnostic imaging
- Electropolished and clean-room ultrasonic degreasing options
Aviation & Drone R&D (Institute of Aviation / Sieć Łukasiewicz)
With Warsaw being the core coordinating center for Polish aeronautics and UAS (Unmanned Aerial Systems) development, saving grams on rotor head assemblies and sensor stabilization gimbals is paramount. Grade 5 titanium grub screws offer a high strength-to-weight ratio unattainable by aluminum or stainless steel.
- Exceptional fatigue strength at high RPM propeller hubs
- Operating temperature threshold reliable up to 400°C
- Full traceability with raw material heat certificates
Engineering Baseline
Material Comparison: Gr5 Titanium vs Traditional Set Screws
Why engineers across Warsaw and Mazovia are phasing out 12.9 class alloy steel and 316L stainless steel grub screws in high-performance applications.
| Performance Attribute | Ti-6Al-4V Grade 5 (Zunvo) | 316L (A4-80) Stainless | 12.9 Grade Carbon Steel | 7075-T6 Anodized Aluminum |
|---|---|---|---|---|
| Density (g/cm³) | 4.43 (Lightweight) | 8.00 (Heavy) | 7.85 (Heavy) | 2.81 (Ultra-light) |
| Tensile Strength (MPa) | 895 – 1050 | 700 – 800 | 1220 (Brittle) | 520 – 570 |
| Yield Strength (MPa) | 828 | 450 | 1100 | 500 |
| Corrosion Resistance (Chloride/Road Salt) | Immune (Forms TiO₂ film) | High (Susceptible to crevice) | Extremely Poor (Oxidizes rapidly) | Moderate (Prone to galvanic) |
| Socket Cam-Out Resilience | Superior (Elastic limit 830MPa) | Moderate (Soft hex corners) | High (Prone to hydrogen embrittlement) | Very Low (Stripped readily) |
| Magnetic Permeability | Non-magnetic (μr = 1.00005) | Slightly magnetic after work | Strong Ferromagnetic | Non-magnetic |
Macro-Economic & Supply Chain Analysis
Titanium Component Trends Across the Warsaw Market
Analyzing why Polish OEM manufacturers and R&D incubators are actively diversifying their supply chains away from domestic distributors toward direct mill-verified sources.
Near-Zero Weight Penalties for Drone & EV Mobility
With Poland's aggressive expansion into electric mobility, unmanned systems, and urban air mobility prototyping around the Warsaw Innovation District, lightweighting is no longer an afterthought. Engineers rely on miniature titanium set screws (M2 to M5) to achieve rotational weight shedding on gimbal balance rings and motor armatures without compromising locking holding torque.
Direct-to-Factory Procurement to Bypass Middlemen
Local stockists in Warsaw and Pruszków typically impose 300% to 500% price markups on imported specialty fasteners while offering limited DIN variations. Polish procurement officers now prefer direct OEM factory collaboration with Baoji suppliers who offer custom lengths, cone, flat, or dog points, and guaranteed EN 10204 3.1 chemical test certs.
Mandatory Traceability & REACH / RoHS Compliance
Poland’s integration into European aerospace and automotive consortiums requires comprehensive compliance. Polish technical buyers reject untraceable secondary-market titanium. Factory-direct partnerships ensure every titanium grub screw batch corresponds strictly to verified raw ingot melt batches free from hazardous heavy metal contaminants.
Why Zunvo Titanium Co., Ltd.
Baoji’s Integrated Titanium Fastener Manufacturer
Founded in 2015 in China's "Titanium Valley" (Baoji), Zunvo operates a dedicated 1,000–3,000 m² machining and cold heading facility backed by an experienced technical team of over 100 specialists.
Direct Access to Certified Baoji Titanium Ore
Located adjacent to leading smelting bases, we guarantee Grade 5 (Ti-6Al-4V) purity with exact alloying proportions: 5.5%–6.75% Aluminum and 3.5%–4.5% Vanadium. 100% spectral verification before billet machining.
100% Thread & Socket Quality Inspection
Grub screws rely on precise hex key or Torx fitment to prevent stripping. Our production incorporates Japanese optical sorting machines, Go/No-Go thread gauges (6g tolerance), and Rockwell micro-hardness verifications.
Rapid Sampling & Warsaw Air Freight Expedited
Drawing-based CNC prototypes manufactured in 3 days. Standard set screw bulk orders ship within 24 hours. Door-to-door express delivery to Warsaw via DHL/FedEx/UPS with complete EU customs clearance documentation.
Procurement Clarity & Standards
Warsaw Procurement FAQs for Titanium Grub Screws
Addressing the most frequent technical, customs, and metallurgy inquiries from Polish mechanical engineers, workshop leads, and B2B purchasing agents.
Which DIN standards are available for titanium grub screws exported to Poland?
We fabricate the complete spectrum of metric socket set screws: DIN 913 (Flat Point for locating without surface damage), DIN 914 (Cone Point for permanent engagement into pivot shafts), DIN 915 (Dog / Full-Dog Point for groove retention), and DIN 916 (Cup Point for maximum cutting torque resistance). Standard sizes range from ultra-miniature M2, M2.5, M3 up to M16, with Torx (Star) and Hexagon drives.
How do you prevent thread galling (seizure) when driving titanium set screws into aluminum or titanium assemblies?
Titanium has a natural affinity to cold-weld when torqued against similar metals under dry friction. To mitigate galling in Polish manufacturing lines, we recommend either specifying our micro-anodized or PVD-coated finishes (which introduce a lubricious barrier layer) or applying an anti-seize paste (such as nickel-based or MoS₂ assembly lubricants) during manual or automated installation.
What are the import procedures, customs duties, and VAT for shipping fasteners to Warsaw, Poland?
Goods entering Poland are cleared through the Warsaw Okęcie customs portal or central Polish logistics nodes under standard TARIC HS Code 8108.90 (Articles of titanium). We provide commercial invoices, packing lists with net weight specifications, and Certificates of Origin. Polish companies with an active EORI and EU VAT number can reclaim the 23% import VAT through standard Polish tax filings. We also offer DDP (Delivered Duty Paid) shipping where all customs duties are settled upfront.
Can Zunvo machine non-standard grub screws based on our CAD (.STEP / .DXF) files?
Yes. Over 40% of our production consists of OEM/ODM custom-engineered components. We support non-standard tip geometries (e.g., spherical ball tips, nylon insert tips for delicate electronics, stepped dog points) and specialized threads including fine pitch (e.g., M8x1.0 or M10x1.25) and imperial UNF/UNC standards. CNC prototypes can be evaluated within 3 days.
What is the Minimum Order Quantity (MOQ) for custom vs standard catalogue orders?
For stocked catalogue items (DIN 913/914/916 in standard Grade 5 plain or anodized finishes), MOQs start at 100 pieces to allow for prototyping and testing. For custom-machined or custom-color anodized batches, our production minimum starts at 100 to 200 units, scaling directly to production runs in excess of 100,000 units per month.
Connect Directly with Our Titanium Fastener Engineers
Need a custom drawing review, material test sheet, or immediate volumetric quotation for Warsaw or EU-wide delivery? Our engineering response team replies within 7 hours on average.
Get a Quote